Liên hệ tư vấn

Ms. Liên

lien.ans@ansvietnam.com

0902937088

lientran87

Thông tin sản phẩm
Thông số kỹ thuật

Fieldbus-to-Fiber Converters ICF-1170I Series Moxa vietnam

Features and Benefits

Transmits up to 2 km over optical fiber
Converts CAN signals to fiber and fiber to CAN signals
Baudrate up to 1 Mbps
Dual power inputs for redundancy
DIP switch for 120 ohm terminal resistance
DIP switch for fiber test mode
LEDs for Fiber TX, Fiber RX, Power 1, Power 2
Wide temperature model available for -40 to 85°C environments
Fully compatible with the ISO 11898 standard

Introduction

The ICF-1170I series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.

Fiber Test Mode

Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (TX) will continuously send out a data signal and the “Fiber TX” LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (RX) receives the data signal form the TX side, the “Fiber RX” LED will light up.

Dimensions

• CAN Communication
CAN Interface	ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND)
Protocols	CAN 2.0A and 2.0B (ISO 11898-2)
Connector Type	3-pin removable screw terminal x1
Termination Resistor	Dip switch selector for 120 Ω terminal resistor
Transfer Rate	Up to 1 Mbps
System Delay	150 ns
Isolation Protection	2 kV
Transmission Distance	Max 2 km (depends on the data rate and the protocol used) Note: The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard.
LED Indicators	PWR1, PWR2, Fiber TX, Fiber RX
• Fiber Communication
Connector Type	ST (multi-mode) fiber ports
Fiber Cable Requirements
• Physical Characteristics
Housing	Metal
Dimensions	30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight	178 g (0.39 lb)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC dual power for redundant power
Input Current	ICF-1170I: 221 mA @ 12 VDC Alarm Contact: 1 relay output with current-carrying capacity of 1 A @ 24 VDC
Voltage Reversal Protection	Protects against V+/V- reversal
Overcurrent Protection	1.1 A (protects against two signals shorted together)
• Standards and Certifications
Safety	UL 508
EMC	EN 55032/24
EMI	CISPR 32, FCC Part 15B Class A
EMS	EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV EN 61000-4-5 (Surge): Power: 2 kV; Signal: 1 kV EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 (PFMF)
Green Product	RoHS, CRoHS, WEEE
Freefall	IEC 60068-2-32
• MTBF (mean time between failures)
Time	792,085 hrs
Standard	Telcordia (Bellcore), GB
• Warranty
Warranty Period	5 years
Details	www.anhnghison.com